A little guidance / Find your way
Good questions.
A clearer way in.
A quick radar video, your local outlook or a map with several weather layers. Here’s where to find what you need.
01 / The controls
A place for
each task.
- Model & time
- Choose the forecast model, weather field and forecast run.
- Layers
- Add radar, clouds and other available fields. Adjust their appearance and wind display.
- Create loop
- Review your selected layers and time range, build a video, or play a completed loop.
- Status
- See what is available and what is still updating. Shared feed administration is reserved for the owner.
Where are the controls on a phone?
The controls button opens the same sections. View map closes the controls so you can see more of the map; in a comparison, it says View comparison.
Where are Local Forecast and River Cast?
Local Forecast gives a point forecast for a location you choose; device location is optional. River Cast is a separate viewer tab for the Evansville river gauge, its forecasts and Cypress Swamp property guidance. Forecast map returns to the weather map.
02 / A little context
Know what
you’re seeing.
Observed radar describes recently measured conditions. Model forecasts simulate how the atmosphere may evolve. Composite reflectivity is a model’s forecast of radar-like echoes; it is not a measurement of rain already falling.
The field’s legend explains its colors and units. The timeline moves through the available times. Regions changes the map area; an experimental label identifies a developing product whose coverage or fields may differ.
03 / Build your view
More detail.
Your choice.
How do clouds, radar and wind work together?
Choose the main weather field in Model & time, then use Layers to add the other fields. Each layer has its own appearance controls. In Create loop, the composition summary shows what will be included and flags missing inputs before a build.
For a clouds, radar and wind video, check that all three appear in that summary. A layer with transparent colors can be difficult to see even when included; review its opacity as well.
Can moving wind streams go into a video?
Yes. Moving streams are available with HRRR 15-minute and RRFS 15-minute. Enable them in Layers, then use Create loop → Build video for an MP4. Wind arrows are also available; the exact-frame image download supports arrows, not moving streams.
If the selected run is missing wind inputs, the viewer explains what is missing and may offer a complete run. A comparison with moving streams needs a supported 15-minute model on both maps.
04 / Another perspective
Side by side.
Time aligned.
Compare models opens two maps. Model & time contains the model and run selectors for both the left and right map. Layers controls the shared weather fields and appearance.
Check both run labels and the displayed valid time. Models can cover different periods or have missing fields, so the available comparison range may be shorter. The viewer explains incomplete coverage; a newer run is not automatically a complete run.
05 / Watch or save
A quick look.
A custom view.
Which video option should I use?
Ready Loops plays radar videos already prepared for the Ohio Valley and WOOF nest. It opens without loading the interactive map or starting a new build. These videos use their published area and composite reflectivity; they do not adopt your custom map layers.
For your own area, clouds, wind or multiple radar layers, use Create loop in the full viewer. Choose the area and clip, review the composition, then Build video. The completed MP4 keeps the settings used for that build.
Why does a custom loop take longer?
A ready video can play immediately after it loads. A fresh custom loop may first wait for inputs or a rendering slot, then render every selected layer and assemble the video. Long, multi-layer clips can still take several minutes; the progress message distinguishes preparation from rendering.
You can keep browsing while it builds. Changing map layers afterward does not change an already completed video. The viewer identifies when your current settings differ from that saved snapshot.
What if playback or a download stalls?
Use the retry or direct-video link shown with the error. The ready player can offer a verified cloud copy of the same video. If a replacement custom build fails, the previous completed video remains available while its download link is valid.
For a problem report, include the model, run, selected layers and the message you saw. Contact & feedback explains how to reach me.
06 / Read the clock
Three times.
One forecast.
- Run time
- When the model forecast was initialized.
- Forecast lead
- How far into that forecast a frame is. F06 means six hours.
- Valid time
- When the displayed frame applies. Check the timezone shown alongside it.
A ready radar video and another field from the same model can update at different times. Read the selected run and field’s freshness label; a playable video does not establish that every parameter is current.
Check forecast availability07 / Credit where it’s due
Built on a
wider foundation.
The viewer brings together NOAA model guidance, MRMS observed radar, ECMWF Open Data and the custom WOOF nest. Available and saved runs vary by source. Names, product labels and source notices identify what you’re looking at.
Bauer Weather is independently developed. Displaying a provider’s data does not imply a partnership or endorsement.
08 / Keep some perspective
Detail with
context.
A model shows a possible evolution of the atmosphere. Sources can disagree about location, timing and intensity. Fine grid spacing and smooth playback do not by themselves establish forecast accuracy. Derived in-between display frames are not additional forecasts issued by the source model.
For official watches and warnings, visit the National Weather Service.